Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Boulder Homeowners
When a torsion spring snaps, the door usually comes down hard and stays down. Sometimes it hangs halfway with the cables slack. Either way, your garage is open to the weather, the door is too heavy to lift safely, and your car is stuck on the wrong side. That’s a job for someone who does spring work every day, not a generalist who has to figure it out on arrival. Our technicians have up to 12 years of experience with high-tension springs and work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. We handle garage door spring repair as a core service, not an add-on, and same-day service is often possible in Boulder when you call early. Call (833) 508-9584 for a free estimate.
Key Takeaways
- Torsion and extension springs store enormous tension. A snapped spring can whip cables and hardware across the garage, so keep clear and call a pro.
- Typical spring repair in Boulder runs $180 – $340 for one spring; a matched pair costs about twice that because both springs are almost always replaced together.
- Same-day emergency response is available. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
- The price is quoted and agreed before any work starts, and the written estimate sets the final price.
What Our Garage Door Spring Repair Service Includes
Springs come in two designs, and the fix is different for each. We diagnose which system your door uses before we touch anything, then quote the work in writing so you know what you’re paying for.
Torsion Spring Replacement
A torsion spring is the horizontal coil mounted on the shaft above the door, and it does the lifting work through cable drums on each side. It fails when the metal fatigues and snaps, which usually happens with a loud bang and leaves the door dead weight. We replace torsion springs with the correct wire gauge and cycle rating for your door’s weight, wind them to the proper tension, and check the drums and cables while we’re up there. Most torsion jobs include replacing both springs as a matched pair, since a partner spring of the same age is usually close to failing too.

Extension Spring Replacement
Extension springs run along the horizontal tracks on each side of the door, stretching as the door closes and pulling it back up. Older homes around Boulder often still have them, and they need a safety cable run through the middle because a failed extension spring can fly free. We replace them in matched pairs, add or replace the safety cables, and confirm the door balances smoothly through its full travel. If your door has extension springs and no cables through them, that’s worth fixing before anything else.

Broken Spring Repair
A broken spring is the most common call we take, and the symptom is usually obvious: the door won’t lift, or it lifts a few inches and stops, or you find a coil of wire on the floor. We confirm the break, check whether the opener was damaged trying to force the door, and replace the failed spring with a properly sized match. If the opener’s gear or trolley took a beating, we’ll tell you rather than let you discover it after the spring is fixed.

Spring Adjustment
Sometimes the spring isn’t broken, just out of balance. A door that drifts up or down on its own, slams the last few inches, or feels heavy by hand usually needs a tension adjustment rather than a replacement. We measure the door’s balance, adjust the springs to match the door’s weight, and test the travel so the opener isn’t fighting the spring. Correct adjustment takes strain off the opener and makes the door easier to operate by hand.
Safety Cable Installation
Safety cables are the thin steel cables that run through the center of extension springs to contain them if they break. They’re inexpensive and they matter, especially on older doors that were installed before cables became common practice. We run new cables through every extension spring we touch and check the anchor points at each end. If your door has extension springs without cables, we can add them as a standalone job.
Spring Inspection
A spring inspection is a close look at the coils, cables, drums, and anchor brackets for the wear that precedes a failure. We check for gaps in the coil, rust at the winding cone, frayed cables, and uneven tension side to side. It’s a sensible call before a Boulder winter, when a door that’s already marginal tends to give out at the worst moment. You get a straight answer on what’s fine, what’s close, and what should be replaced now.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work on your brand, and we know where each one wears out. LiftMaster and Chamberlain doors and openers come through our hands often, and we know how their spring and cable geometry behaves on heavier doors and how to match tension without overloading the opener. Genie systems show up on a lot of mid-weight residential doors, where we watch for opener gear wear once a spring has failed and the motor has been straining. Clopay and Amarr doors have their own panel weights and track profiles, so we size springs to the actual door rather than a generic chart.
Wayne Dalton doors, especially the TorqueMaster-style systems, take a different approach to spring tension, and we know how to service them without damaging the enclosed housing. Craftsman openers and doors are common on older Boulder homes, and Raynor equipment shows up on plenty of newer builds, each with its own spring sizing. Our technicians have up to 12 years of experience across these makes, which means we usually know the right part before we arrive. Whether you have Raynor, LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or any other make, we can help.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. A torsion spring snapping sounds like a firecracker or a backfire, and it’s the most common sign of failure. If you heard it and the door won’t lift, stop running the opener.
- The door won’t open, or opens a few inches and stops. A dead spring leaves the door too heavy for the opener to lift. Forcing it burns out the motor and can bend panels or snap cables.
- A visible gap in the spring coil. A clean break in the coil means the spring has failed, even if the door still partly works. Don’t stand under a broken spring to look closer.
- The door feels heavy by hand or drifts on its own. A door that won’t stay put when you lift it halfway is out of balance, which points to weak or misadjusted springs. This is a sign to check, not a job to do yourself.
- Cables hanging slack, or a door sitting crooked. Slack cables and an uneven door usually mean the spring lost tension and the cables went with it. That combination can drop the door suddenly, so keep clear and call.
Our Garage Door Spring Repair Process – Step by Step
- 1
Phone diagnosis and scheduling. We ask what happened, what you heard, and whether the door moves at all. That tells us whether to treat it as an urgent security issue or a scheduled repair, and we book a window that fits.
- 2
Onsite inspection and safety check. The technician secures the door, checks the springs, cables, drums, and brackets, and confirms the opener wasn’t damaged trying to lift a dead door. We measure the door’s weight and balance before quoting.
- 3
Written estimate before any work. You get a clear price for the spring replacement and any related parts, quoted and agreed before anything is removed. If we find a worn cable or drum, it goes in the estimate rather than on the final invoice.
- 4
Spring replacement with proper tooling. Winding torsion springs takes the right winding bars and controlled technique, and we work one side at a time so tension stays balanced. Extension springs get new safety cables and matched pairs.
- 5
Balance test and walkthrough. We cycle the door several times, check that it holds position at the halfway point, test the opener’s force and travel settings, and walk you through what was replaced. If the opener needs attention, we tell you before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Boulder?
Garage door spring repair in Boulder typically runs $180 – $340 for one spring. Because torsion springs and extension springs are almost always replaced as a matched pair, a pair usually lands around twice that range. Here’s how the common jobs break down:
| Job | Typical estimated range |
|---|---|
| Single spring replacement | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Safety cable installation (with spring work) | Included in the spring estimate |
| Cable repair, if cables went with the spring | $130 – $250 |
| Opener repair, if the motor was strained | $120 – $320 |
What moves the number: the spring type, the door’s weight, the cycle rating of the spring you choose, and whether a cable, drum, or opener part failed alongside it. A door that’s been run for weeks on a broken spring often needs more than the spring. How to avoid overpaying: get the quote in writing before work starts, ask whether both springs are being replaced and why, and ask what the estimate includes. We answer all three before we touch a winding cone.
Every estimate is free, and the price is quoted and agreed before any work starts. The written estimate sets the final price, so the invoice matches the quote unless you approve a change first. Call (833) 508-9584 for an exact quote.
Garage Door Spring Repair Near Boulder – Our Service Area
We connect Boulder homeowners with vetted local pros who also cover garage door spring repair in Louisville, plus Superior, Lafayette, Erie, Broomfield, Longmont, Westminster, Arvada, Frederick, Northglenn, and Dacono. Travel times vary with traffic and weather, so we’ll give you a realistic window when you call. Emergency calls get priority when a broken door leaves your garage open. For Superior and Lafayette, see garage door spring repair and call us to book.
Serving Boulder, CO – Our Local Coverage Area
We serve Boulder and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Boulder
Garage door spring repair means replacing or adjusting the torsion or extension springs that counterbalance the door’s weight. A working spring makes a 150-pound door feel like it weighs a few pounds, and a failed spring makes it nearly impossible to lift. The repair involves removing the old spring, installing a correctly sized replacement, and balancing the door so the opener isn’t overworked. Because the springs hold serious tension, this is work for a trained technician rather than a homeowner.
Most single-door spring replacements take one to two hours on site, including the balance test. A matched pair with new safety cables or a cable repair can run longer, and a job that includes opener repair adds time. We give you a realistic window when you book, and we won’t rush a high-tension job to hit a number. If we find a related failure, we’ll tell you before we continue.
Typical spring repair in Boulder runs $180 – $340 for one spring, and about twice that for a matched pair, since both springs are usually replaced together. Cable repair adds $130 – $250 if the cables failed with the spring, and opener repair is $120 – $320 if the motor was strained. The written estimate sets the final price, quoted and agreed before any work starts. Call (833) 508-9584 for an exact quote, estimates are free.
Yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. That brand familiarity means we diagnose faster and source the correct part the first time instead of guessing at spring size on arrival. Whether your door is a newer Raynor or an older Craftsman, we can help. Call (833) 508-9584 to book.
Same-day service is often possible in Boulder, and emergency response is available when a broken door leaves your garage open. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a call that comes in then is booked into the next opening. Call (833) 508-9584 to check availability.
We stand behind our work with a satisfaction guarantee, and parts carry the manufacturer’s warranty terms. Ask about the warranty on your specific springs when you get the estimate, since it varies with the spring you choose. The local pro we connect you with is licensed and insured as their state requires. Call (833) 508-9584 with any warranty questions.
Clear the floor area under and around the door, and move cars out of the garage if you can so the technician has room to work. Don’t try to open or close the door once a spring has failed, and keep kids and pets away from the tracks. If you know the door’s brand or model, have it handy, though we can identify it on site. Call (833) 508-9584 to book your visit.
Schedule Your Garage Door Spring Repair Service in Boulder Today
A broken spring leaves your garage open and your door unsafe to lift. We handle torsion and extension spring repair with the right tooling, the correct spring for your door, and a written price agreed before work starts. Our technicians have up to 12 years of experience, and the local pro is licensed and insured as their state requires. Call (833) 508-9584 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Learn more about Boulder Garage Door Repair Co and the full range of services we connect homeowners with.
Written by the team at Boulder Garage Door Repair Co.